If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post as topics are sometimes moved; or look at "Your Posts".
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.

Daimler 'Twenty' front axle, knowledge please?

Post Reply
JedFurneaux
Posts: 47
Joined: Tue Jul 11, 2017 5:50 pm
Location: Tregoss Cornwall

Daimler 'Twenty' front axle, knowledge please?

Post by JedFurneaux »

Hi All. I need to get the steering cross rod (track rod) off my LQ2/20 complete with the ball joints (track rod ends). The obvious way seemed to be to remove the lock nuts securing the short steering arms to the swivel housing and then remove the arms complete with ball joints & rod so I could get the ball joints off on the bench rather than grovel around on the floor any more than necessary.
I have slackened off the 7/16" Whit. castellated nuts hoping to tap the ends to drive the steering arms out of the swivel housing. Ha! No chance. Having beaten hell out them with a copper mallet I cannot drive them back through the swivel housing.
Does anyone know how they fit into the swivel housing? I am guessing perhaps a spline or key as of course these arms must not be able to move in relation to the swivel housings.
Anyone tackled this before?
Best wishes,
Jeremy.
Attachments
IMG_20200209_151547.jpg

Soundmike
Posts: 47
Joined: Thu Mar 17, 2016 8:54 am

Re: Daimler 'Twenty' front axle, knowledge please?

Post by Soundmike »

I am rebuilding an LQ3-20 but haven't got to the steering yet. But I suspect you might be better to remove the track rod ends rather than the arms. the steering arms are likely to be on a tapered keyed and/or splined shaft, will be the proverbial *#!**^! to remove.
Good luck, I will be interested to see how you get on.

Post Reply