Please don't post someone's email address or, if you must, put spaces around the @ or change @ to (at). Some people don't want to risk it being harvested by spambots.
If you can't find a post, click "Active topics" or "Your posts", as topics are sometimes moved; it's probably quicker than using the Search button.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.

Engine woes. ! !

JT7196
Posts: 852
Joined: Sat Feb 13, 2016 7:22 am

Re: Engine woes. ! !

Post by JT7196 » Tue Dec 04, 2018 7:02 pm

Hi Chaps, whilst talking about Valve Stem Seals, I thought that it would be a good idea to show owners my ”mod”.
I have also included a picture showing the Spring Clips that are fitted to prevent the Valve from dropping down into the Cylinder Bore in the event of a Valve Spring breaking.
If the Spring Clips are missing, they can easily be re-made by cutting the coils from a very small Spring .

C547D55B9584.jpeg[/attachment
55BABFB0-54F6-45A7-B9CC-C547D55B9584.jpeg
E5605B37-CACD-4729-A4A3-99341511AE11.jpeg

I should add, that although the Seals are a “ Push fit” onto the Valve Guides, I secured them in position with a spot of Super Glue ,to ensure the did not lift if they came into contact with the Valve Springs . 😀
Attachments
ABA44A3B-1BDA-4419-9C76-D3873A41B3B9.jpeg
Last edited by JT7196 on Fri Dec 07, 2018 10:50 pm, edited 1 time in total.

JT7196
Posts: 852
Joined: Sat Feb 13, 2016 7:22 am

Re: Engine woes. ! !

Post by JT7196 » Wed Dec 05, 2018 8:12 pm

Next job, we’ll having refitted all of the Valves etc, I have discovered that the Core Pliug at the rear of the Head, has some very slight Rust marks around part of one edge, so it’s off to my local Engine overhaulers to pick up a couple of new Core Plugs, let’s hope all goes well with it’s replacement , will keep one as a spare !

Cheers Al :)
Last edited by JT7196 on Fri Dec 07, 2018 10:51 pm, edited 1 time in total.

JT7196
Posts: 852
Joined: Sat Feb 13, 2016 7:22 am

Re: Engine woes. ! !

Post by JT7196 » Thu Dec 06, 2018 8:52 pm

Hi Chaps, new Core Plug now fitted, so I turned my attention to another problem that has been bugging me for longer that I can remember.
Im not sure if any of you other owners has experienced the same problem, but I have noticed that the Head Gasket has a tendency to allow water to permeate along or through it ( not sure which) which then exits along the edge of the Head Gasket, anyway it’s always been an “Anoyance” , so I thought that while I Head was off, I would at least try and find an answer.
I had noticed that most of the Cooling System Ports in the Head were suffering from corrosion around the edges, so I have used this product ( pictured) to build up the corroded edges to hopefully help prevent these leakages.
The product in question is called Hysol 3475A & B produced by Loctite, this is a superb product that I have used with great success in the past on other applications, and it’s very “Tough” !!

Take a look at the rest of the pictures, this will show how the edges of the holes can be retrieved.
5B6199A1-C65E-4C96-BB57-7A7274C73ACD.jpeg
97486BA6-426E-4743-889D-11F3DD94371D.jpeg
3835CA7B-8EB6-4ECB-B0DB-42BF277A0FCE.jpeg

I have now repainted the Cyl Head and it looks great!

Cheers Al 😀😀😀

JT7196
Posts: 852
Joined: Sat Feb 13, 2016 7:22 am

Re: Engine woes. ! !

Post by JT7196 » Mon Dec 10, 2018 6:00 pm

Hi Chaps, Engine due to be re- fitted tomorrow morning😊😊
23837F6C-7DB4-4E64-80F6-CA7E4BCB7C9C.jpeg
D2C49784-7C3E-4EC3-99A8-119BE9FFC8BE.jpeg
[attachment=2]42A541BD-32D2-4D94-9380-46350B60B2C1.jpeg[/attachment

Cheers A’l
Attachments
42A541BD-32D2-4D94-9380-46350B60B2C1.jpeg

bop
Posts: 73
Joined: Mon Feb 15, 2016 3:26 am
Location: Alberta Canada

Re: Engine woes. ! !

Post by bop » Mon Dec 10, 2018 6:59 pm

NICE WORK!!!
Thanks for sharing your info on the rebuild. I wish more people would follow your lead and share their work with the rest of us.
Bob

classiclife
Posts: 99
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: Engine woes. ! !

Post by classiclife » Tue Dec 11, 2018 5:29 pm

Hello Al,

As Bob has rightly stated, many thanks for posting progress and photos - all very interesting and informative.

I look forward to the next instalment.

Regards.

Richard

JT7196
Posts: 852
Joined: Sat Feb 13, 2016 7:22 am

Re: Engine woes. ! !

Post by JT7196 » Tue Dec 11, 2018 6:07 pm

Thanks Chaps, managed to get the Engine back in this afternoon with help from a Peter Russell, was a bit of a struggle, but got there in the end, Radiator in place etc, will take some photos, and put them on here later 😀😀
One thing I did forget to mention in a previous post , re Water seepage from the side of the Head Gasket, was that a mate of mine, who has probably forgotten more than I know, suggested Annealing the Head Gasket prior to fitting, which I did very carefully using my Gas Blow Lamp, and then dunking it into a sink full of water, it will be interesting to see if this helps, As a precaution,I also gave the Gasket a light coating of Wellsesl, for good measure.😀😀

Cheers Al😀

JT7196
Posts: 852
Joined: Sat Feb 13, 2016 7:22 am

Re: Engine woes. ! !

Post by JT7196 » Tue Dec 11, 2018 10:57 pm

Hi, hers a few more piccys, showing the Engine in position, plus some of pipe work that I’ve
resprayed,
58F52E5F-6D62-4AE0-AEBA-F47EA404FB9E.jpeg




The worst job so far, and for any body who has had to connect fit that darned Bottom Hose Casting onto the bottom of the Radiator will know exactly what I’m talking about ! It’s an absolute Pig , to get lined up, as it fits in an aperature in the Radiator Support Cross Member,.
The Drain Tap was non operational, so decided to fit another spare one that had a good Tap in it, do you think that dam Casting would fit? Well after about an hour and a half trying, I gave up and fitted the original one back on, lining up the pipework that passes up through the Chassis to connect up with the Thermostat By- Pass in another patience testing item..
So anyway, it’s now nearly 11.00 pm and to be honest, I’ve had enough for one day !!
Time for a shower, and Bed 💤💤💤💤

Cheers Al 😒😒😒
26902648-74C9-45FD-AAA0-DDE9196E8672.jpeg
You can clearly see where the Hose has chaffed against the Chassis, it actually passes up through a Box section, and to say it’s a tight fit is an understatement !!
56A2F9EA-CE67-4B42-8D32-0AA0EDC75D02.jpeg
58EEEE57-6D71-4895-B0BD-DC2645C2DD01.jpeg

JT7196
Posts: 852
Joined: Sat Feb 13, 2016 7:22 am

Re: Engine woes. ! !

Post by JT7196 » Wed Dec 12, 2018 10:13 pm

Hi Chaps, when started the Engine was very lumpy and sounded decidedly unwell, checked the Ignition time which needed slight adjustment, but was still not running well after adjustment .
After much head scratching, I remembered the I had changed one of the Jest in an attempt to make the engine run slightly weaker ( bad decision! ) so repleced the original one, and now running fine, but have just one Tappet letting me know it’s there .

Cheers Al 😀😀

ranald
Posts: 237
Joined: Sat Feb 13, 2016 8:21 am
Location: North Wales

Re: Engine woes. ! !

Post by ranald » Thu Dec 13, 2018 6:56 pm

All looks very impressive! Can I just you about your thermostat? Where is it sited? What temperature does it open at? Is it in a housing or just fitted directly into the hose? Thanks, Ranald

Post Reply