Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

lanchester LD 10 barker coil spring isolator

Post Reply
triddell
Posts: 58
Joined: Mon Jun 27, 2016 7:08 pm

lanchester LD 10 barker coil spring isolator

Post by triddell »

Does anyone know if it's possible to buy replacement rubber or polyurethane isolaters for the bottom of the front suspension coil springs of an LD10? I'm refitting reconditioned front dampers and the pads under the coil springs are perished. There's a helpful youtube clip by Catherine Jones on how to make them, but I'd rather buy some if possible.
Thanks
Tom

Sydsmith
Extremely Wise Man
Extremely Wise Man
Posts: 1369
Joined: Sun Feb 14, 2016 11:15 pm
Location: Aberystwyth Wales

Re: lanchester LD 10 barker coil spring isolator

Post by Sydsmith »

There is a chance, may be small but the SP250 ones might fit, see David Manners site, if you ring them they will give you the size.

Norfolk Lad
Wise Man
Wise Man
Posts: 713
Joined: Wed Feb 10, 2016 8:23 pm

Re: lanchester LD 10 barker coil spring isolator

Post by Norfolk Lad »

There was talk the jag xj6 where the same size but having never seen this proven cannot say for sure.

triddell
Posts: 58
Joined: Mon Jun 27, 2016 7:08 pm

Re: lanchester LD 10 barker coil spring isolator

Post by triddell »

Thanks
I'm still checking - I've found that Toyota Landcruisers have the same coil spring widths so I'm checking them as well.
Tom

Post Reply