Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

Gearbox mount LD10

Post Reply
Eric990j
Posts: 44
Joined: Sun Sep 18, 2016 8:19 am
Location: Kent

Gearbox mount LD10

Post by Eric990j »

Hi all

LD10 gearbox mount, any ideas where to get one? Mine looks ok but obviously not as the gearbox is on the chassis!

Many thanks

Eric

User avatar
watkindj
Extremely Wise Man
Extremely Wise Man
Posts: 1156
Joined: Wed Feb 10, 2016 11:27 am
Location: Cambridge
Contact:

Re: Gearbox mount LD10

Post by watkindj »

Another part not readily available but taken from the LD10 website the below are suggested (unsure if the part numbers are still current as last check was when my predecessor added them)

Metalastik mounting #31/238 can apparently be modified by filing the holes to fit the original gearbox mounting dimensions. Metalastik mounting #M31-501 can apparently be modified in a similar way but also requires two new holes to be drilled in the center plate.
Darren
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk

Post Reply