Hi Steve, here are the details for the Rubber extrusions.
Supplier:-
https://www.vintagecarparts.co.uk/
Windscreen Insert Rubber Flat Glazing Strip PT 518 A,B,C,& D
Eternal Sealing Extrusion :- RM
As far as I can remember, it’s RM3 that you need, Probably best to ask for samples to be sure.
Hope this helps ,
Cheers A’l
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Lanchester La11 windscreen
Re: Lanchester La11 windscreen
Last edited by JT7196 on Mon Jan 29, 2018 4:31 pm, edited 2 times in total.
Re: Lanchester La11 windscreen
Hi, this is what you need:- ]
https://www.vintagecarparts.co.uk/categ ... extrusions
https://www.vintagecarparts.co.uk/categ ... reen-and-t
In one of my previous threads I said that you needed either RM1 or RM2 ,well actually its RM3 you need, but ask for samples anway
Cheers a'l
https://www.vintagecarparts.co.uk/categ ... extrusions
https://www.vintagecarparts.co.uk/categ ... reen-and-t
In one of my previous threads I said that you needed either RM1 or RM2 ,well actually its RM3 you need, but ask for samples anway
Cheers a'l
Re: Lanchester La11 windscreen
Hi Steve, was this any help??
Cheers A’l
Cheers A’l
Re: Lanchester La11 windscreen
Hi Al,
Your feedback and comment are always helpful..
Whilst the progress on my Lanchester eleven is slow here is an up date:
1) Water pump refurbished and fitted
2) Carb refurbished and fitted
3) All leather seats re-upholstered
4) All bright work re-chromed
5) Wiring harness replaced
6) Plywood replaced with marine ply
7) Engine Painted, oil changed and ignition electric changed.
8) Wool Carpet and industrial sewing machine purchased
9) Managed to find a sunroof and all the fixings
10) New Tyre's and brakes
11) Dashboard replaced.
12) Dented o/s wing and running boards replaced
The next step for me is to get the fuel tank back in, floor down and start fitting the sunroof and headling. I have purchased all the material, just need the courage to start the process. I might try and pop up with Debbie and get some guidance from you before I start the interior.
Your feedback and comment are always helpful..
Whilst the progress on my Lanchester eleven is slow here is an up date:
1) Water pump refurbished and fitted
2) Carb refurbished and fitted
3) All leather seats re-upholstered
4) All bright work re-chromed
5) Wiring harness replaced
6) Plywood replaced with marine ply
7) Engine Painted, oil changed and ignition electric changed.
8) Wool Carpet and industrial sewing machine purchased
9) Managed to find a sunroof and all the fixings
10) New Tyre's and brakes
11) Dashboard replaced.
12) Dented o/s wing and running boards replaced
The next step for me is to get the fuel tank back in, floor down and start fitting the sunroof and headling. I have purchased all the material, just need the courage to start the process. I might try and pop up with Debbie and get some guidance from you before I start the interior.
It is a Lanchester
Re: Lanchester La11 windscreen
Without wishing to hijack the thread could you tell me where you had the water pump reconditioned?
Re: Lanchester La11 windscreen
Hi Steve, your more than welcome to pop up and see me at any time, I could give you some pointers in refitting that Sunroof etc
Cheers Al
Cheers Al
Re: Lanchester La11 windscreen
JT7196 maybe able to offer assistance on the water pump refurb
It is a Lanchester
Re: Lanchester La11 windscreen
Hi Sid, yes it’s tru that I have been responsible for overhauling Daimler and Lanchester Water Pumps, I will enquire if the chap who was responsible for the machining work is still working there.
He did hint some time ago, that he was thinking about retirement, if he has indeed retired, then I may not be able to take on any more overhauls I’m afraid.
Will get back to you as soon as I know more.
Cheers A’l
He did hint some time ago, that he was thinking about retirement, if he has indeed retired, then I may not be able to take on any more overhauls I’m afraid.
Will get back to you as soon as I know more.
Cheers A’l
Re: Lanchester La11 windscreen
Hi Al,
could you provide me with some clarity regarding the inner seal:
Windscreen Insert Rubber Flat Glazing Strip PT 518 A,B,C,& D
There are all different thicknesses and widths and I'm not sure what to buy
Many thanks
could you provide me with some clarity regarding the inner seal:
Windscreen Insert Rubber Flat Glazing Strip PT 518 A,B,C,& D
There are all different thicknesses and widths and I'm not sure what to buy
Many thanks
It is a Lanchester