Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

Lanchester LA10

Post Reply
Weealim
Posts: 7
Joined: Thu Sep 01, 2016 9:02 pm
Location: South Lanarkshire

Lanchester LA10

Post by Weealim »

Can anyone help me get the dimensions of the rear axle dipstick on my LA10 1934. I have a brass wing nut cap but no way of checking the level! Any help would be greatly appreciated.

Norfolk Lad
Wise Man
Wise Man
Posts: 713
Joined: Wed Feb 10, 2016 8:23 pm

Re: Lanchester LA10

Post by Norfolk Lad »

Alan Wheatley had some of these measuring sticks made so fairly sure he still has some left , but he is out of the country at present he may see your posting. If not will send you or him a message on his return. Peter ;)

buckfield
Posts: 194
Joined: Wed Feb 10, 2016 11:38 am
Location: south wales

Re: Lanchester LA10

Post by buckfield »

Hi, not sure if the 10 axle is the same as the my 1939 11,but this is the spec from the manual, hope it helps, but Alan would know for certain. Tony
Attachments
lanchester 11 rear axle dipstick info.JPG

Norfolk Lad
Wise Man
Wise Man
Posts: 713
Joined: Wed Feb 10, 2016 8:23 pm

Re: Lanchester LA10

Post by Norfolk Lad »

THIS IS FROM THE OLD FORUM 2011
http://archive.dloc.co.uk/forum/topic.a ... ,DIP,STICK Hope this helps .


Peter ;)

Weealim
Posts: 7
Joined: Thu Sep 01, 2016 9:02 pm
Location: South Lanarkshire

Re: Lanchester LA10

Post by Weealim »

Hi all, thanks for the info. I have the tools to copy the picture of the dipstick and make my own. The help was invaluable. Thanks again

Post Reply