Please don't post someone's email address or, if you must, put spaces around the @ or change @ to (at). Some people don't want to risk it being harvested by spambots.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.
New sub-forum Club Documents & Information for DLOC members only. If you can't see the new sub-forum (inside DLOC Forum: Club & Branch News), please email John-B .

Lanchester LA10

Post Reply
Weealim
Posts: 3
Joined: Thu Sep 01, 2016 9:02 pm
Location: South Lanarkshire

Lanchester LA10

Post by Weealim » Thu Feb 07, 2019 7:46 pm

Can anyone help me get the dimensions of the rear axle dipstick on my LA10 1934. I have a brass wing nut cap but no way of checking the level! Any help would be greatly appreciated.

Norfolk Lad
Posts: 537
Joined: Wed Feb 10, 2016 8:23 pm

Re: Lanchester LA10

Post by Norfolk Lad » Sun Feb 10, 2019 11:55 am

Alan Wheatley had some of these measuring sticks made so fairly sure he still has some left , but he is out of the country at present he may see your posting. If not will send you or him a message on his return. Peter ;)

buckfield
Posts: 90
Joined: Wed Feb 10, 2016 11:38 am
Location: south wales

Re: Lanchester LA10

Post by buckfield » Sun Feb 10, 2019 12:55 pm

Hi, not sure if the 10 axle is the same as the my 1939 11,but this is the spec from the manual, hope it helps, but Alan would know for certain. Tony
Attachments
lanchester 11 rear axle dipstick info.JPG

Norfolk Lad
Posts: 537
Joined: Wed Feb 10, 2016 8:23 pm

Re: Lanchester LA10

Post by Norfolk Lad » Sun Feb 10, 2019 4:48 pm

THIS IS FROM THE OLD FORUM 2011
http://archive.dloc.co.uk/forum/topic.a ... ,DIP,STICK Hope this helps .


Peter ;)

Weealim
Posts: 3
Joined: Thu Sep 01, 2016 9:02 pm
Location: South Lanarkshire

Re: Lanchester LA10

Post by Weealim » Sun Feb 10, 2019 6:19 pm

Hi all, thanks for the info. I have the tools to copy the picture of the dipstick and make my own. The help was invaluable. Thanks again

Post Reply