Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Bishop Gear Steering Box shims
Bishop Gear Steering Box shims
Hello, Does anyone have any side cover shims they could spare? Refer to the attached photo for dimensions. Thank you. Ranald
Re: Bishop Gear Steering Box shims
I think I might have to make my own shims. I need brass sheets at least 150mm x 150mm and .002” thick. There are a few suppliers on ebay but typically their sheet sizes are 150mm x 75mm. Does anyone know where i can buy the sheet size i need? Thanks for reading this. Ranald
Re: Bishop Gear Steering Box shims
Would this be suitable? Minimum order of £35 though. https://www.repco-tech.co.uk/shims-product?shim_id=422
Mike
Mike
Re: Bishop Gear Steering Box shims
Thanks for your suggestion. I could ask them if they would consider a smaller order. Occasionally, just occasionally, when I phone trade suppliers I come across someone really helpful. I've even had someone saying the easiest way for them to help was to send a free sample!