The regulator on my Lanchester LD10 is indicating over 17 volts at the battery with the engine running at some revs.
Any help on how to adjust the regulator would be appreciated.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
RF91 regulator adjustment.
-
- Wise Man
- Posts: 715
- Joined: Wed Feb 10, 2016 8:23 pm
Re: RF91 regulator adjustment.
THINK this is not that far from what it should be but will check have the test printed off will email if you send your email address .peter
checked it says 15-5 at 3000 rpm
found this http://mgaguru.com/mgtech/books/pdf/Luc ... _Tests.pdf
just click and collect hope this helps
checked it says 15-5 at 3000 rpm
found this http://mgaguru.com/mgtech/books/pdf/Luc ... _Tests.pdf
just click and collect hope this helps
-
Onlinewatkindj
- Extremely Wise Man
- Posts: 1156
- Joined: Wed Feb 10, 2016 11:27 am
- Location: Cambridge
- Contact:
Re: RF91 regulator adjustment.
very useful Peter Thanks!
Darren
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk
-
- Wise Man
- Posts: 715
- Joined: Wed Feb 10, 2016 8:23 pm
Re: RF91 regulator adjustment.
Guess a link from LD10 web page might be good or put on as part of it , have used it to test mine so it helped me Darren.
-
Onlinewatkindj
- Extremely Wise Man
- Posts: 1156
- Joined: Wed Feb 10, 2016 11:27 am
- Location: Cambridge
- Contact:
Re: RF91 regulator adjustment.
Have acquired the relevant permission and a link is now on the site on the relevant page Here
Darren
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk