Page 1 of 1

lanchester 14 timing mark

Posted: Fri May 20, 2016 6:14 pm
by 1949startinghandle
where is the timing mark for the 14? Book says on the flywheel but I see no window in the housing.

Re: lanchester 14 timing mark

Posted: Fri May 20, 2016 7:06 pm
by theoldman
There is a hole in the top of the bell housing (to enable you to get at the filler plug) and MOST cars have the timing mark on the edge of the flywheel, which can be seen through the hole.

If yours hasn't got them, it's a question of doing it the old fashioned way, by ear..................

As I have said before, i've never used a timing mark to time up an engine in my life.................

Re: lanchester 14 timing mark

Posted: Fri May 20, 2016 8:47 pm
by 1949startinghandle
thanks a lot! I'll have a look tomorrow.

Re: lanchester 14 timing mark

Posted: Mon Mar 04, 2019 11:22 pm
by bop
Hope this helps
20190304_161615.jpg
Bob

Re: lanchester 14 timing mark

Posted: Mon Mar 04, 2019 11:26 pm
by Phillmore
A mirror and torch might help.