Forum registration has been disabled because of many problem registrations from Russia.
Email mail @ chalkevalley.info (no spaces) if you wish to join the forum and an administrator will register you.
If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.

BSA 10 HP

Post Reply
Albert
Posts: 3
Joined: Sun Feb 12, 2017 3:44 pm
Location: Hertfordshire

BSA 10 HP

Post by Albert » Sun Feb 12, 2017 4:22 pm

I am trying to remove the rear wing of my BSA but the hood pram iron winder seems to be stopping it. There is no obvious fixings, so can anyone offer advice please.
A couple of photos of the winder housing below.
Attachments
P2120033.jpg
P2120031.jpg

Post Reply