Please don't post someone's email address or, if you must, put spaces around the @ or change @ to (at). Some people don't want to risk it being harvested by spambots.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.
New sub-forum Club Documents & Information for DLOC members only. If you can't see the new sub-forum (inside DLOC Forum: Club & Branch News), please email John-B .

LD10 shock absorber link arm bush

Post Reply
John Ronnie
Posts: 1
Joined: Tue Feb 28, 2017 10:03 pm
Location: Scotland

LD10 shock absorber link arm bush

Post by John Ronnie » Tue Feb 28, 2017 10:13 pm

Hi does anyone know the size and availability of the front shock absorber link arm bushes? Or of any substitute that would do the job?
JR

Simon Hyslop
Posts: 235
Joined: Wed May 04, 2016 3:30 pm

Re: LD10 shock absorber link arm bush

Post by Simon Hyslop » Wed Mar 08, 2017 7:36 pm

Hello John,
I hadn't forgotten you asking me at the last committee meeting if I could look up your name on this and let you know, but I saw from this question that you must have found it. I thought there might have been some replies but in their absence, I wonder if these :

http://www.ebay.co.uk/itm/Daimler-DB18- ... SwezVWvMab

from David Beales might be the same size. From the LD10 website, the diameter of the pin in the shock absorber arm is 9/16" but the link rod inner diameter isn't given. I haven't had my own LD10 out yet and so I can't readily measure this but maybe someone else will know. I'll be able to find it in a week or so. It would then be a case of finding out from David Beales if the dimensions correspond.

When fitting, a fluid that makes the job much easier is Citroen LHM fluid for the hydropneumatic suspension. I'll fill you out a taste before Tuesday night and if you find some bushes that fit, it'll make the job easier. I have a press if you need the use of it but a decent vice and some sockets usually works ok.

Post Reply