BSA Front Wheel Drive Aluminium Cylinder Heads
Posted: Tue Mar 05, 2019 12:33 pm
THIS IS A LAST CALL TO ANYONE THAT WOULD LIKE A NEW ALUMINIUM CYLINDER HEAD FOR THE BSA FRONT WHEEL DRIVE THREE WHEELER 1933 TO 1936
I'm now ready to go ahead with production.
If you own one of these little cars you'll know that the heads are always badly corroded and in most cases become porous after many years of use, as mine did. Even my spare is beyond use and welding them proved fruitless. Yours might be OK now, but when you remove it you will probably find porosity as they corrode badly from the inside out.
The new heads will come machined and ready to fit inc. the four brass spark plug inserts. Price will be around the £550.00 TO £600.00 mark plus VAT each.
A once in a lifetime chance to get yourself a brand new cylinder head cast in modern corrosion resistant aluminium complete with brass spark plug inserts.
Please contact me on info@dynamoregulatorconversions.com or by telephone to +44 (0) 1522 703422 to register your interest. Once I have 10 firm orders, a deposit will be required and I will contact you as such (as you can imagine, the tooling and set up costs for this project are not cheap).
I'm now ready to go ahead with production.
If you own one of these little cars you'll know that the heads are always badly corroded and in most cases become porous after many years of use, as mine did. Even my spare is beyond use and welding them proved fruitless. Yours might be OK now, but when you remove it you will probably find porosity as they corrode badly from the inside out.
The new heads will come machined and ready to fit inc. the four brass spark plug inserts. Price will be around the £550.00 TO £600.00 mark plus VAT each.
A once in a lifetime chance to get yourself a brand new cylinder head cast in modern corrosion resistant aluminium complete with brass spark plug inserts.
Please contact me on info@dynamoregulatorconversions.com or by telephone to +44 (0) 1522 703422 to register your interest. Once I have 10 firm orders, a deposit will be required and I will contact you as such (as you can imagine, the tooling and set up costs for this project are not cheap).