Thanks all. I've done both LJ and LD ones, but have never tackled a Conquest!!
Looks like I have a job and a half.......................
Cheers
Neil
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Conquest Manifolds
- theoldman
- Extremely Wise Man
- Posts: 1110
- Joined: Mon Feb 08, 2016 2:39 pm
- Location: Bacton on Sea, Norfolk UK
Re: Conquest Manifolds
Normal for Norfolk
- theoldman
- Extremely Wise Man
- Posts: 1110
- Joined: Mon Feb 08, 2016 2:39 pm
- Location: Bacton on Sea, Norfolk UK
Re: Conquest Manifolds
Parts just arrived SIXTEEN inaccessible nuts to remove!!!
Ah well..................
Ah well..................
Normal for Norfolk
-
- Chief Geek
- Posts: 1361
- Joined: Mon Feb 08, 2016 8:12 pm
- Location: Northwich, Cheshire
- Contact:
Re: Conquest Manifolds
Sounds to me like a job you should delegate to a garage!
Graham Emmett ¦ DLOC Chairman ¦ chair@dloc.co.uk ¦ 07967 109160
Northwich, Cheshire
DB18 1949 LCV522 (Yes that one with the P100s)
Northwich, Cheshire
DB18 1949 LCV522 (Yes that one with the P100s)
- theoldman
- Extremely Wise Man
- Posts: 1110
- Joined: Mon Feb 08, 2016 2:39 pm
- Location: Bacton on Sea, Norfolk UK
Re: Conquest Manifolds
Seriously thinking that, Mr. E.............................
Normal for Norfolk
Re: Conquest Manifolds
Cor' Neil, were you really up at circa 3:00 am posting stuff on the bloomi'n forum ???
Cheers Big BAD A'l
Cheers Big BAD A'l
- theoldman
- Extremely Wise Man
- Posts: 1110
- Joined: Mon Feb 08, 2016 2:39 pm
- Location: Bacton on Sea, Norfolk UK
Re: Conquest Manifolds
Er............"pm" = "post meridiem" = "Pip Emma" = afternoon.....................................
Do you SERIOUSLY think I stay up till 2.39 AM to post on here, Al?
Neil
Do you SERIOUSLY think I stay up till 2.39 AM to post on here, Al?
Neil
Normal for Norfolk
-
- Wise Man
- Posts: 847
- Joined: Sat Feb 13, 2016 1:25 pm
- Location: Worcestershire Herefordshire border
Re: Conquest Manifolds
Did you get those ring spanners Neil? I couldn't think of a way to do it without them unless you have double jointed fingers eight inches long!
Andy
1954 Conquest Mk1, 1956 Conquest Mk2, 1957 Conquest Century Mk2, 1955 Austin A90 Westminster
1954 Conquest Mk1, 1956 Conquest Mk2, 1957 Conquest Century Mk2, 1955 Austin A90 Westminster
-
- Wise Man
- Posts: 847
- Joined: Sat Feb 13, 2016 1:25 pm
- Location: Worcestershire Herefordshire border
Re: Conquest Manifolds
Actually having been underneath mine today to retrieve the lost spanner, the lower manifold nuts look pretty accessible from below. It could be another option Neil?
Andy
1954 Conquest Mk1, 1956 Conquest Mk2, 1957 Conquest Century Mk2, 1955 Austin A90 Westminster
1954 Conquest Mk1, 1956 Conquest Mk2, 1957 Conquest Century Mk2, 1955 Austin A90 Westminster