Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

hard to get castings.

Post Reply
Marcel Renshaw
Man of Many Parts
Man of Many Parts
Posts: 673
Joined: Fri Feb 12, 2016 8:44 pm
Location: Derbyshire

hard to get castings.

Post by Marcel Renshaw »

As many know over the last few years I have had patterns made and reproduced a number of items which were not available.
The big question now is what castings do people want. This is open for Lanchester cars also.

ddstewie
Posts: 37
Joined: Thu Feb 18, 2016 8:13 am

Re: hard to get castings.

Post by ddstewie »

Hi,SP250 water pump housings could be one.

ranald
Helpful Person
Helpful Person
Posts: 485
Joined: Sat Feb 13, 2016 8:21 am
Location: North Wales

Re: hard to get castings.

Post by ranald »

Lanchester 15/18 Water Pump Body (Part No. 112910 Parts Book TC68)

prickle
Posts: 25
Joined: Sat Apr 09, 2016 1:10 am
Location: Ockley, Surrey
Contact:

Re: hard to get castings.

Post by prickle »

The housing for the SP250 water pump is in hand and should be available later this year.

Marcel Renshaw
Man of Many Parts
Man of Many Parts
Posts: 673
Joined: Fri Feb 12, 2016 8:44 pm
Location: Derbyshire

Re: hard to get castings.

Post by Marcel Renshaw »

It's good to know that SP250 waterpump castings are being sorted. Does anyone know of other items that are currently being sorted?

Ian Slade
Wise Man
Wise Man
Posts: 791
Joined: Sat Feb 13, 2016 9:54 am
Location: Sevilla Spain

Re: hard to get castings.

Post by Ian Slade »

Did anyone know the spindle and bearing is the same as a Jag 240?
Owner since the 70's, Genghis is slightly to my left.

weddingcartim
Posts: 67
Joined: Mon Feb 15, 2016 7:38 pm

Re: hard to get castings.

Post by weddingcartim »

the automatic cholke housing on the 24 would be good think it might be on a 17 aswell

Post Reply