As many know over the last few years I have had patterns made and reproduced a number of items which were not available.
The big question now is what castings do people want. This is open for Lanchester cars also.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
hard to get castings.
-
- Man of Many Parts
- Posts: 673
- Joined: Fri Feb 12, 2016 8:44 pm
- Location: Derbyshire
Re: hard to get castings.
Hi,SP250 water pump housings could be one.
Re: hard to get castings.
Lanchester 15/18 Water Pump Body (Part No. 112910 Parts Book TC68)
Re: hard to get castings.
The housing for the SP250 water pump is in hand and should be available later this year.
-
- Man of Many Parts
- Posts: 673
- Joined: Fri Feb 12, 2016 8:44 pm
- Location: Derbyshire
Re: hard to get castings.
It's good to know that SP250 waterpump castings are being sorted. Does anyone know of other items that are currently being sorted?
Re: hard to get castings.
Did anyone know the spindle and bearing is the same as a Jag 240?
Owner since the 70's, Genghis is slightly to my left.
-
- Posts: 67
- Joined: Mon Feb 15, 2016 7:38 pm
Re: hard to get castings.
the automatic cholke housing on the 24 would be good think it might be on a 17 aswell