Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

Daimler V8 to Borg Warner T5 gearbox bellhousing

daimlersteve
Helpful Person
Helpful Person
Posts: 496
Joined: Wed Mar 09, 2016 11:20 am

Re: Daimler V8 to Borg Warner T5 gearbox bellhousing

Post by daimlersteve »

be a tad cautious on this subject . gm input shafts are a different length to ford / cossi . a trap for young players

Sonus
Posts: 208
Joined: Wed Apr 13, 2016 2:19 pm

Re: Daimler V8 to Borg Warner T5 gearbox bellhousing

Post by Sonus »

Like this ;)
Attachments
20150208_175243.JPG

daimlersteve
Helpful Person
Helpful Person
Posts: 496
Joined: Wed Mar 09, 2016 11:20 am

Re: Daimler V8 to Borg Warner T5 gearbox bellhousing

Post by daimlersteve »

Colin Drays( Five speed conversions ) bellhousing is for the ford 2.95 first gear set box. Same as the ones i have built.

Ozzsp250
Posts: 284
Joined: Tue Feb 16, 2016 12:35 am
Location: Arizona, USA

Re: Daimler V8 to Borg Warner T5 gearbox bellhousing

Post by Ozzsp250 »

Dellow conversions have a Daimler either auto or manual at a lower price than those from New Zealand too. The SP250 is not listed but they can made them in a week or so.

https://dellowconversions.com.au/produc ... gs-manual/

Sonus
Posts: 208
Joined: Wed Apr 13, 2016 2:19 pm

Re: Daimler V8 to Borg Warner T5 gearbox bellhousing

Post by Sonus »

Ozzsp250 wrote: Tue Nov 06, 2018 3:35 pm Dellow conversions have a Daimler either auto or manual at a lower price than those from New Zealand too. The SP250 is not listed but they can made them in a week or so.

https://dellowconversions.com.au/produc ... gs-manual/
But that is for the Toyota W158 gearbox only isn't it?

Sonus
Posts: 208
Joined: Wed Apr 13, 2016 2:19 pm

Re: Daimler V8 to Borg Warner T5 gearbox bellhousing

Post by Sonus »

Does anyone have a steel auto bellhousing available that they could weigh?

Ozzsp250
Posts: 284
Joined: Tue Feb 16, 2016 12:35 am
Location: Arizona, USA

Re: Daimler V8 to Borg Warner T5 gearbox bellhousing

Post by Ozzsp250 »

If I recall Dellow made bell housings to fit the Daimler engine to various gearboxes as the T5 was used in Australia by Holden and Ford.

Post Reply