Forum registration by users has been disabled because of many problem registrations from Russia. Email mail @ chalkevalley.info (no spaces) if you wish to join the forum and an administrator will register you.
If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.

Drilling holes in dense concrete

Website Comments, instructions for REGISTERING and POSTING, Chat about anything
Post Reply
New Dexter
Posts: 378
Joined: Fri Feb 12, 2016 9:41 am

Drilling holes in dense concrete

Post by New Dexter » Mon Dec 31, 2018 1:26 pm

I have to drill some 8mm holes in some concrete walls. I have some angle brackets I need to screw to the wall and they will be fastened to the wall using No.12 screws.
I have a Hitachi drill with hammer facility but it's proving difficult to make much progress. So far I have managed almost one hole and there are another 31 to come. In the past I have used an SDS drill borrowed from a friend and that was far more successful. The concrete wall was made from a very strong concrete mix.
Does anyone have a recommendation please? Should I hire an SDS drill? I have the SDS bits, just not the drill....

JT7196
Posts: 1024
Joined: Sat Feb 13, 2016 7:22 am

Re: Drilling holes in dense concrete

Post by JT7196 » Mon Dec 31, 2018 1:34 pm

Hire the Biggest, Meanest, Hammer Drill you can get your hands on, it will save you a lot of hard work !!

Cheers Al :D

classiclife
Posts: 370
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: Drilling holes in dense concrete

Post by classiclife » Mon Dec 31, 2018 1:41 pm

I purchased a Makita SDS drill and needed it a lot when erecting a number of greenhouse's on to concrete bases and retaining walls.

The drill is an absolute joy to use and will go through concrete like a hot knife through butter.

Would also add that having very decent SDS drill bits is a must - cheap stuff does not last long.

To answer your Q hiring one is a must or perhaps a late Xmas treat !!

Regards.

Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Area Representative.

Southern Classics Society Events Co-ordinator.
www.southernclassics.org.uk

Big Col
Posts: 405
Joined: Tue Feb 16, 2016 12:45 pm
Location: Leeds

Re: Drilling holes in dense concrete

Post by Big Col » Mon Dec 31, 2018 9:14 pm

Totally agree with previous posters.
Normal hammer drills are too quick and just make heat rather than drill holes.
8mm should be no bother with a decent SDS but a pilot hole always makes life easier.
If doing a lot in one go, a squirt of water with a washing up liquid bottle also helps.
Colin,
I may be slow but I’m rough as well !

Sydsmith
Posts: 789
Joined: Sun Feb 14, 2016 11:15 pm
Location: Aberystwyth Wales

Re: Drilling holes in dense concrete

Post by Sydsmith » Tue Jan 01, 2019 11:49 am

No2 Son is a carpenter and gave me a 240 volt De Walt SDS drill many years ago when he had to change to 110, the old thing is superb and drilling just about anything.

Before you hire one, most builders use battery drills these days and have old 240 and 110 volt drills lying around, my son has several, they will sell them to you for a tenner or so, or they often turn up at car boot sales or garage sales and are a cheap as chips, well worth the investment. Syd

Post Reply