Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

conquest ns wing

Post Reply
Db n j
Wise Man
Wise Man
Posts: 919
Joined: Sun Mar 13, 2016 8:55 am
Location: uk shropshire

conquest ns wing

Post by Db n j »

Looking for a decent Conquest NS Front wing.

Db n j
Wise Man
Wise Man
Posts: 919
Joined: Sun Mar 13, 2016 8:55 am
Location: uk shropshire

Re: conquest ns wing

Post by Db n j »

Still looking for a useable NS Front wing

or

an Off-side in fibreglass.

Can any one help, or point me in the right direction ???

Phillmore
Wise Man
Wise Man
Posts: 847
Joined: Sat Feb 13, 2016 1:25 pm
Location: Worcestershire Herefordshire border

Re: conquest ns wing

Post by Phillmore »

Have you tried Wedding Car Tim or John Nash?
Andy

1954 Conquest Mk1, 1956 Conquest Mk2, 1957 Conquest Century Mk2, 1955 Austin A90 Westminster

Db n j
Wise Man
Wise Man
Posts: 919
Joined: Sun Mar 13, 2016 8:55 am
Location: uk shropshire

Re: conquest ns wing

Post by Db n j »

Thanks Andy,

Tim cant help in this case, not sure about John.

regards

db

Graham
Posts: 343
Joined: Sun Feb 21, 2016 12:05 am
Location: Wirksworth , Derbyshire

Re: conquest ns wing

Post by Graham »

There are a pair of conquest wings on eBay, not sure how good they are

Db n j
Wise Man
Wise Man
Posts: 919
Joined: Sun Mar 13, 2016 8:55 am
Location: uk shropshire

Re: conquest ns wing

Post by Db n j »

Graham,

Thanks, I have looked at the wings. They appear to be in poor condition - for example the raised bead which runs down the length of the wing is
missing - probably under a layer of filler, so not good enough.

Will keep looking for something better.

Post Reply