Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

1957 Conquest Century MK2

Post Reply
AlbertHamilton
Posts: 21
Joined: Mon Jul 04, 2016 1:25 pm
Location: Telford Shropshire

1957 Conquest Century MK2

Post by AlbertHamilton »

Wanted Urgent Conquest century MK2 Exhaust Manifold, If anyone has one for sale, or knows where one can be purchased. Thank You in antisipation

classiclife
Classic Wise Man
Classic Wise Man
Posts: 1601
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: 1957 Conquest Century MK2

Post by classiclife »

Hello.

I posted this a few weeks ago and maybe useful.

A chap by the name of Roy selling a large number of spares for the above vehicle - he can be contacted on 01246.822.269 - Chesterfield.

I do not know the gent, saw the advert in CMM and passing the info on.

Good luck.

Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024

AlbertHamilton
Posts: 21
Joined: Mon Jul 04, 2016 1:25 pm
Location: Telford Shropshire

1957 conquest century mk2 exhaust manifold

Post by AlbertHamilton »

Does any member know where I can get exhaust manifold for my century,. or does any member have one for sale. TY in anticipation A Hamilton

classiclife
Classic Wise Man
Classic Wise Man
Posts: 1601
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: 1957 conquest century mk2 exhaust manifold

Post by classiclife »

I note you have posted this twice now in less than 24hrs, on the first occasion I gave a response - I presume the seller has been unable to assist ??

Regards.

Richard.

[Topics merged to avoid confusion -John-B]
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024

bakergh
Posts: 109
Joined: Wed Feb 24, 2016 1:57 pm
Location: New Forest, Hampshire

Re: 1957 Conquest Century MK2

Post by bakergh »

Hi Albert
I think you need to be more specific as to what you need.
The Conquest Century engine has two exhaust manifolds, a front one and a rear one. These are both castings but are different so we would need to know which one you need if the problem is actually one of the castings.
The two manifolds connect to a y pipe the first part of the exhaust system which has a flexible pipe in the front part of the y. This is prone to failure.
Could you please let us know which of the three parts you actually require so that we might advise you further.
Graham

chrisb
Posts: 20
Joined: Sat Feb 20, 2016 8:56 am
Location: Harlington, Beds

Re: 1957 Conquest Century MK2

Post by chrisb »

Hi
I have half of an exhaust manifold. Y shaped, left side 2 port and right side 1 port as viewed looking at the block. Suspect that it is front half. I can email photos if needed.
Chrisb

AlbertHamilton
Posts: 21
Joined: Mon Jul 04, 2016 1:25 pm
Location: Telford Shropshire

Re: 1957 Conquest Century MK2

Post by AlbertHamilton »

Dear Classiclife, I wish to thank you for your info regards exhaust manifold, I got in touch with the gent you mentioned and plan to visit him this week-end, I pray he has what i want. Thank you very much Sir. Albert

AlbertHamilton
Posts: 21
Joined: Mon Jul 04, 2016 1:25 pm
Location: Telford Shropshire

Re: 1957 Conquest Century MK2

Post by AlbertHamilton »

Dear Chrisb, Thank you for your reply to my post, I am going to see a gent about the exhaust manifold, he said he has one, im hoping its the right one.if not I will get in touch with you again if that's OK, In the mean time will you post pics of what you have with a view of my purchasing yours. Please Oblige A Hamilton

classiclife
Classic Wise Man
Classic Wise Man
Posts: 1601
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: 1957 Conquest Century MK2

Post by classiclife »

Hello Albert,

Fingers crossed and good luck; I am sure "we" will be interested to hear how it pans out.

All the best.

Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024

Post Reply