Conquest Boot Hinge

Pendle · Post by **Pendle** » Mon Mar 23, 2020 12:59 am

Does anyone have a spare left boot hinge (or a pair of hinges) for a Conquest saloon?

ROSS70JEN · Post by **ROSS70JEN** » Tue Mar 31, 2020 11:40 am

hi my name is Bryan from the UK
I have a set of boot hinges do you still need them?

Pendle · Post by **Pendle** » Wed Apr 01, 2020 3:06 am

Hi Bryan. I have just attempted to send you an email. Please post here if you don’t receive it. Thank you

Graham · Post by **Graham** » Sat Apr 25, 2020 6:26 pm

Did you have any luck with the hinges. I may have some

HenryC · Post by **HenryC** » Sun Apr 26, 2020 12:27 pm

Hi all,

Bear in mind there are two types of Conquest (and Century) hinges. MK1 has 6 mounting holes and Mk2 has four mounting holes and is shorter. The DJ252 is different again, 4 mounting holes but slightly shorter still to accommodate the hood.

I have a pair of 6 hole hinges, if that helps.

grahamemmett · Post by **grahamemmett** » Sun Apr 26, 2020 1:42 pm

Of course, why would they be the same, why have a standard type when you can have 3 or 4 variants?

Cylinder head gasket for the DB18? Do you want the 21 stud or the 14 stud version?

No wonder they lost money.

Pendle · Post by **Pendle** » Sun Apr 26, 2020 6:55 pm

Thank you. I did find a pair of hinges and they are on their way. The hinge needed is for a DJ252 and the ones I found were with a DJ252. I was not aware of any differences, but I may have made a lucky acquisition.

Graham · Post by **Graham** » Mon Apr 27, 2020 2:09 am

That’s good news, glad you have sorted it. I have quite a few conquest parts that I got from a friend.

Conquest Boot Hinge

Conquest Boot Hinge

Re: Conquest Boot Hinge

Re: Conquest Boot Hinge

Re: Conquest Boot Hinge

Re: Conquest Boot Hinge

Re: Conquest Boot Hinge

Re: Conquest Boot Hinge

Re: Conquest Boot Hinge