Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

Clayton Dewandre Servo Specialist

Technical issues not related to a DLOC car marque, eg tyres, ethanol, other car makes, etc. and legal, political and insurance
classiclife
Classic Wise Man
Classic Wise Man
Posts: 1601
Joined: Wed Sep 05, 2018 9:55 am
Location: Ridgewood - East Sussex
Contact:

Re: Clayton Dewandre Servo Specialist

Post by classiclife »

Hello Rolf,

Always up for a bit of sleuthing, I went through this Forum checking on Clayton Dewandre regarding your quest to locate such a specialist.

I found the following: Classic Brakes, Kenton, Devon, which was supplied by Ranald in February 2019 and he again updated on this particular thread. I believe this is the address you have been searching for and of course your recall that the location was Kent is actually Kenton in Devon.

It was in connection with brakes for a 20/27 hearse and it appears that the original enquirer had a positive result from the company.

Have attached the company link: http://www.classic-spares.co.uk/

Good luck and I hope the above assists.

Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024

Rolf B.
Posts: 245
Joined: Wed Apr 05, 2017 7:07 pm
Location: 68309 Mannheim, Germany

Re: Clayton Dewandre Servo Specialist

Post by Rolf B. »

Hello Richard,

thank you for your effort. This is the address I was looking for. Tuesday, May 05th Ranald has given a reply in this thread with the link to the website of Classic Spares in Kenton.

Unfortunately they can't help for parts for Clayton Dewandre servos. But meanwhile I'm in contact with Derek Sleigh and it could be possible he can help. Please assist me by crossing the fingers. ;)

Best regards
Rolf

Observer
Posts: 24
Joined: Tue Feb 16, 2016 8:16 pm

Re: Clayton Dewandre Servo Specialist

Post by Observer »

The servo on 15 has only one serviceable part a cup seal apart from ware in Lincs ,marcel has supplied them in the past valve is metal to metal weare is minamal

Rolf B.
Posts: 245
Joined: Wed Apr 05, 2017 7:07 pm
Location: 68309 Mannheim, Germany

Re: Clayton Dewandre Servo Specialist

Post by Rolf B. »

Meanwhile my son has fabricated a casting mould by an 3D printer and casted a new smooth silicone seal for the piston. This seal replaces the old seal made of kid leather, which in shape was not convincing, because the length at the side has been far to short and wasn't covering the spring fingers completely.
Attachments
Ganzseitiges Foto2.pdf
(1.37 MiB) Downloaded 69 times
Ganzseitiges Foto.pdf
(1.61 MiB) Downloaded 68 times

Post Reply