Hi everyone,
I'm restoring a 1951 LD10 and I'm looking to save as much money as possible by doing the work myself where I can. I've seen lots of promising videos and discussions online, but I wanted to see if anyone in DLOC had any first hand experience of this rust removal technique.
I'm looking at buying a big wheelie bin off off eBay to put a 1/10 mix of Molasses and water to submerge the steel front end and rear wings.
Also interested in
Any other rust/ paint stripping products for steel that I'm unable to remove and submerge
Safe paint stripper for aluminium and primer to avoid corrosion.
Thanks in advance,
Chris
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Using molasses for rust removal
-
- Posts: 16
- Joined: Thu Jun 02, 2016 8:00 pm
- Location: Bromley
Re: Using molasses for rust removal
Seems that brake fluid still remains the universal paint destroyer.
Takes paint off most anything you do not want it removed from.
Cola syrups contains phosphoric acid which is also good for soaking off rust.
Takes paint off most anything you do not want it removed from.
Cola syrups contains phosphoric acid which is also good for soaking off rust.
Bud
Still, that "OTHER" SP 250
https://hosting.photobucket.com/images/ ... &crop=fill
http://i180.photobucket.com/albums/x15/ ... M_0123.jpg
Still, that "OTHER" SP 250
https://hosting.photobucket.com/images/ ... &crop=fill
http://i180.photobucket.com/albums/x15/ ... M_0123.jpg
-
- Wise Man
- Posts: 503
- Joined: Thu Mar 10, 2016 10:02 pm
- Location: Sydney, Australia
Re: Using molasses for rust removal
Check that Consort restoration series on youtube. I think that a vinegar bath is used there to de-rust and clean components.
Re: Using molasses for rust removal
On the old forum about 2 years ago there was a lot of discussion regarding the use of molasses for rust removal. I'm not sure if the thread can be accessed. I have successfully used a molasses/water solution to remove rust from small hardware (nuts, bolts, washers, brackets). I left the parts to soak for about a week, and they came out clean. One warning which I have read regarding molasses/water solutions - don't soak aluminum alloy parts.
Chris Young
1954 DJ 250
1954 DJ 252
1957 DJ 254
1952 DB18 Special Sports
1954 DJ 250
1954 DJ 252
1957 DJ 254
1952 DB18 Special Sports
- watkindj
- Extremely Wise Man
- Posts: 1156
- Joined: Wed Feb 10, 2016 11:27 am
- Location: Cambridge
- Contact:
Re: Using molasses for rust removal
Darren
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk
South Cambridgeshire
XJ Registrar &
LD10 Registrar
LD10 Website Webmaster Incorporating (Worldwide Lanchester LD10 Register)
http://ld10.awardspace.co.uk
Re: Using molasses for rust removal
Hi there,
Yes, molasses is great - slower than vinegar but removes all the rust it can reach. It doesn't seem to affect enamel-painted surfaces (not sure about acrylic)... a large wheelie bin can hold a lot of parts!
Nigel
Yes, molasses is great - slower than vinegar but removes all the rust it can reach. It doesn't seem to affect enamel-painted surfaces (not sure about acrylic)... a large wheelie bin can hold a lot of parts!
Nigel
-
- Wise Man
- Posts: 795
- Joined: Sat Feb 13, 2016 2:14 pm
- Location: Penkridge. Staffs.
Re: Using molasses for rust removal
..................... But watch the binmen don't wheel it away whilst your parts are soaking!!!