Please don't post someone's email address or, if you must, put spaces around the @ or change @ to (at). Some people don't want to risk it being harvested by spambots.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.
New sub-forum Club Documents & Information for DLOC members only. If you can't see the new sub-forum (inside DLOC Forum: Club & Branch News), please email John-B .

CONQUEST MASTER CYLINDER

Post Reply
ROSS70JEN
Posts: 8
Joined: Mon Nov 07, 2016 4:16 pm
Location: LOOE CORNWALL

CONQUEST MASTER CYLINDER

Post by ROSS70JEN » Fri Jul 13, 2018 7:28 pm

HI I HAVE JUST REPLACED ALL 4 FRONT SIZED UP WHEEL CYLINDER AN BACK PIPES.
TO MY HORROR WHEN I TRIED TO BLEAD THE BRAKES NO OIL CAME OUT.
I HAVE NOW REMOVED THE MASTER CYLINDER AFTER MANY HOUES ON MY BACK. WHATES THE BEST WAY?
THE CYLINDER IS NOW IN MY VICE AND MAY BE OK, IF I PUSH HSRD ON THE PLUNGER OIL WILL PUMR OUT.
IS THERE A BETTER WAY I CAN TEST THE MASTER CYLINDER BE FOR I PUT IT BACK. I HAVE ORERED A REPAIR KIT. BUT IT WOULD BE GOOD TO TEST BEFORE INSTALLATION BACK UNDER THE CAR.

ANY HELP WOULD BR GOOD BRYAN

Post Reply