Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post or "Your Posts", as topics are sometimes moved.
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation after nr. as this negates search.
Identification help needed
-
- Posts: 7
- Joined: Sat Feb 09, 2019 2:27 am
- Location: Richmond, Ky USA
Identification help needed
I recently acquired this car as a 51 Chrysler Demler. After several hours of searching I believe I have determined it to be a 51 Daimler DB18 Consort. Can anyone tell me for sure what it is?
-
- Posts: 300
- Joined: Fri Feb 12, 2016 8:44 pm
- Location: Derbyshire
Re: Identification help needed
It is a Consort with the roof removed.
Re: Identification help needed
Another sad case. What a pity a good saloon destroyed.
Salmons
Salmons
-
- Posts: 477
- Joined: Mon Feb 08, 2016 8:12 pm
- Location: Northwich, Cheshire
Re: Identification help needed
Can you find a chassis number - on the bulkhead
It will look like this:
It will look like this:
Graham Emmett
Northwich, Cheshire
DB18 1949 LCV522 (Yes that one with the P100s)
https://www.db18.org
Northwich, Cheshire
DB18 1949 LCV522 (Yes that one with the P100s)
https://www.db18.org
-
- Posts: 7
- Joined: Sat Feb 09, 2019 2:27 am
- Location: Richmond, Ky USA
Re: Identification help needed
Don't worry I am putting this beauty back on the road soon. It may not be restored all original but at least it will be better than rotting in a field or going to the crusher. They pretty much gutted this car, so there are no identification tags at all.
-
- Posts: 300
- Joined: Fri Feb 12, 2016 8:44 pm
- Location: Derbyshire
Re: Identification help needed
It would be good to see it back running in some form. It will be interesting to see how it turns out.
-
- Posts: 23
- Joined: Mon Mar 07, 2016 11:23 am
Re: Identification help needed
Have you checked for the chassis number on the chassis itself - should be close to the steering box? ~ John R
-
- Posts: 169
- Joined: Thu Mar 10, 2016 10:02 pm
- Location: Sydney, Australia
Re: Identification help needed
If you wnT to go to the trouble and expense the NSW Daimler Club has a complete bonnet and front guards in store which could be used to make the front end look like it used to.
They were a good looking saloon, so you could do worse than keep the front looking authentic.
Lots of photos on the web to give you an idea.
Cheers
Peter Grant
Sydney Australia
They were a good looking saloon, so you could do worse than keep the front looking authentic.
Lots of photos on the web to give you an idea.
Cheers
Peter Grant
Sydney Australia
-
- Posts: 7
- Joined: Sat Feb 09, 2019 2:27 am
- Location: Richmond, Ky USA
Re: Identification help needed
There are no identification tags on the car.
Can you give me a link for that club? I am wanting to find a grille, lights, and mirrors to put back on it. Maybe even the bumpers.
Can you give me a link for that club? I am wanting to find a grille, lights, and mirrors to put back on it. Maybe even the bumpers.
-
- Posts: 169
- Joined: Thu Mar 10, 2016 10:02 pm
- Location: Sydney, Australia
Re: Identification help needed
Hi,
Just google Daimler & Lanchester Owners Club of Australia.
You can email us from addresses listed.
The big issue will be the cost of packaging and shipping to you from Australia.
Cheers
Peter Grant
Just google Daimler & Lanchester Owners Club of Australia.
You can email us from addresses listed.
The big issue will be the cost of packaging and shipping to you from Australia.
Cheers
Peter Grant