If you would like to join the DLOC, please visit the Club's website https://www.dloc.org.uk/
Please don't post someone's email address. Some people don't want to risk it being harvested by spambots and GDPR regulations discourage it.
Always look at "ACTIVE TOPICS" which gives all posts in date & time order if you can't find a post as topics are sometimes moved; or look at "Your Posts".
Reg. nrs. Please add reg. nr. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.

SP gearbox removal

Paulkennedy
Posts: 89
Joined: Fri Feb 12, 2016 11:01 pm

Re: SP gearbox removal

Post by Paulkennedy »

Dave Steve, thanks for the reply I ordered Revingtons tapered pin and roll pin.
Will report when fixed
Thanks Paul

Paulkennedy
Posts: 89
Joined: Fri Feb 12, 2016 11:01 pm

Re: SP gearbox removal

Post by Paulkennedy »

543A0663-7105-4917-8F5E-DF9D35797EE6.jpeg
543A0663-7105-4917-8F5E-DF9D35797EE6.jpeg (27.82 KiB) Viewed 271 times
DaveM, thanks for your advice. As I said on the phone Revingtons pin was undersize as well I have used my old pin which located in the cross shaft ok but I have backed this up with a couple of roll pins as well as seen in the pic you. I also show the reason for dismantling the gearbox in the first place.
Thanks Paul
A5B0CDFD-117D-4A31-963F-65DF7CEE396A.jpeg
A5B0CDFD-117D-4A31-963F-65DF7CEE396A.jpeg (38.01 KiB) Viewed 271 times

Post Reply