Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
SP250 REAR AXLE
SP250 REAR AXLE
Hi, is the rear axle the same in the A,B,and C spec versions of the SP other than for possible ratio changes ,Regards ,Terry .
-
Vortex O'Plinth
- Extra-Wise Man
- Posts: 1065
- Joined: Fri Feb 12, 2016 8:15 pm
- Location: Gloucestershire
Re: SP250 REAR AXLE
There were two variants of the Salisbury 7HA axle fitted to SP's. Rather than being identified with a specific car spec they were specified as early and late and they do have different differential assemblies. The early type had three lubricant plugs, the late two.
Nick
"Don't bother with the Air & Space Museum - there's nothing to see.......".
"Don't bother with the Air & Space Museum - there's nothing to see.......".
-
silverdart
- Posts: 285
- Joined: Sat Feb 13, 2016 10:49 am
- Location: West Midlands
Re: SP250 REAR AXLE
Hi, Just to add to the above, the A spec cars had the series 1 axle fitted and the B and C spec cars had the series 2 axle fitted.
All external fittings are identical therefore either axle can be fitted to either car.
As Nick says, the input pinions and differential cages have slightly different dimensions.
Dave.
All external fittings are identical therefore either axle can be fitted to either car.
As Nick says, the input pinions and differential cages have slightly different dimensions.
Dave.