Hi Simon, forgot to mention that I used MGB Gear Leaver Grommets on the front Bumper Dumb Iron’s
I have fitted both sorts picture in the past, but my preferred type, is the Convoluted one .
Hope this is helpful
Cheers Al
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Lanchester LAII for auction 951UXE
Re: Lanchester LAII for auction 951UXE
Thanks Al, that's useful about those gearlever grommets, I will give them a go. Did you, by any chance, find a good substitute for the rear engine mounts ? I have made a note of some possibilities but until I take out what's there, I won't be able to order them. That wouldn't be the end of the world by any means but if there was a known part which works, I'd have them ordered up and ready to change. Apart from that, fortunately a lot of the bits have survived quite well and it's just really the door handle and wedge I need to find but hopefully they'll turn up somewhere....
Re: Lanchester LAII for auction 951UXE
Good morning Simon, I’ll take a look in my spare parts and see if I have any suitable rubber mountings for you, I do have one Door Handle, but it’s an “ Outside” one which I think is slightly larger that the interior ones, again I’ll take a look later today if I get the chance .
Don’t think that I have a “Wedge” but I’ll take a l@@k
Cheers Al
Don’t think that I have a “Wedge” but I’ll take a l@@k
Cheers Al
Re: Lanchester LAII for auction 951UXE
Hi, just as I thought, it’s an “Outside” Handel , so no good I’m afraid
No Wedge either , sooory
Cheers Al
No Wedge either , sooory
Cheers Al
Re: Lanchester LAII for auction 951UXE
No problem, I do appreciate you looking. They'll turn up somewhere, maybe if autojumbles resume !
Re: Lanchester LAII for auction 951UXE
Hi, I have found a number of engine mounting Rubber sections, I’ll photograph them tomorrow for you, Ilooks like I have at least Two that will do for the Rear Engine mountings, think I’ve also found some Front ones as well .
Will be in touch again tomorrow all being well.
Cheers Al
Will be in touch again tomorrow all being well.
Cheers Al
Re: Lanchester LAII for auction 951UXE
Hi Simon, well spent some considerable time trying to identify those Rubber parts, the Two that I thought were Rear Engine Mountings turned out in fact to be Gearbox Mounting Rubbers, I also found one that I don’t actually have on my own car, it’s the one that is located, ( Or should be !) on the underside of the Cross Brace that the Gearbox sits on. Pt No 265106
All of the other parts are for LA 10’s ranging from approx 1933 to 1936
[attachment=0]F89885B0-DF1D-458D
All of the other parts are for LA 10’s ranging from approx 1933 to 1936
[attachment=0]F89885B0-DF1D-458D
Last edited by JT7196 on Tue Jun 15, 2021 8:35 pm, edited 3 times in total.
Re: Lanchester LAII for auction 951UXE
Hi Simon,
Sorry unable to put any more on as it keeps telling me that the file is too large , and I don’t how to sort it!!
Will need to wait till my partners son come in to sort it for me !
Cheers Al
Sorry unable to put any more on as it keeps telling me that the file is too large , and I don’t how to sort it!!
Will need to wait till my partners son come in to sort it for me !
Cheers Al
Re: Lanchester LAII for auction 951UXE
Hi, finally mangled to crack it, so here are some more pictures
Fortunately, I have managed to collect several copies of the LA10 / 11 Parts Books ,which has enabled me to be to identify these parts by their “Part No “
Beers Al
Fortunately, I have managed to collect several copies of the LA10 / 11 Parts Books ,which has enabled me to be to identify these parts by their “Part No “
Beers Al
Re: Lanchester LAII for auction 951UXE
Hi Simon, here’s a picture of that Door Handle , like I said, it is an exterior one and not suitable for what you need .
Cheers Al
Cheers Al
- Attachments
-
- F44AD655-E3DB-451C-937A-BA1039E05ED4.jpeg (35.97 KiB) Viewed 906 times