Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

v8 250 crankshaft spigot bush /bearing

Post Reply
TWF
Posts: 126
Joined: Wed Mar 09, 2016 7:10 pm
Location: Liverpool

v8 250 crankshaft spigot bush /bearing

Post by TWF »

Hi ,my SP is fitted with the saloon engine and saloon manual overdrive gearbox , i have had another saloon engine overhauled and hope to fit it inthe next couple of weeks, today i was transfering the flywheel onto the new engine and noticed that where the new engine has a bronze bush in the end of the crankshaft ,the old engine has a bearing ,i can only see the bronze bush in the parts book and am wondering whether i will have a problem when i come to fit the engine into the car,any information would be most welcome ,Regards ,Terry .

Post Reply