Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
flywheel spacer on v8 250 engine
flywheel spacer on v8 250 engine
Hi , my SP250 is fitted with the engine and overdrive gearbox from the 250 V8 saloon ,i have had another saloon engine rebuilt and intend to fit it soon ,when i was stripping the parts from the old engine i noticed that the flywheel had a spacer behind it .looking in the parts book the automatic has two of these spacers one either side of the drive plate but the manual does not have a spacer behind the flywheel so i am wondering why it was fitted by a previous owner ? the clutch has been changed from the original 8.5" plate to a 9.5" with a diaphragm pressure plate ,should i refit the spacer or leave it out ?any comments would be most welcome ,Regards ,Terry .