Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.

dart accelerator pedal

Post Reply
pflanaga
Posts: 117
Joined: Mon Aug 29, 2016 7:37 pm

dart accelerator pedal

Post by pflanaga »

On the dart accelerator pedal assembly there is a spindle bracket with a bushing. This is attached to the bulkhead with two fasteners.
The parts catalogue shows two 1/4" by 3/4" bolts with a lock washer and the bolt is described as Spire No. 14 3/4".
I cant get these bolts to fit on - its pretty cramped in there and I was wondering if these are bolts or perhaps screws that were used.

Anyone know?

Paul

OttawaSP250
Posts: 25
Joined: Mon Jan 11, 2021 5:32 pm
Location: Ottawa, Ontario Canada

Re: dart accelerator pedal

Post by OttawaSP250 »

I had mine off recently .

There are 2 screws in the engine compartment near the Carb end and 2 bolts with washers and nuts at the pedal end that in my LHD car end near the master cylinders
they look to be 1/4

Post Reply