I’ve had an email requesting a new elbow for a Conquest Century DJ252 drophead thermostat elbow.
It’s not one that I have tooled up to make.
I recall many years ago when I decided to do the swan neck for the New drophead that someone had tooling and castings for the DJ252..
The person was in either Australia or New Zealand but unfortunately I don’t have any contact details to be able to pass on to the person.
Can anyone put me in touch with him?
Many thanks in advance. Marcel.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Daimler Conquest century thermostat elbow.
-
- Man of Many Parts
- Posts: 673
- Joined: Fri Feb 12, 2016 8:44 pm
- Location: Derbyshire
Re: Daimler Conquest century thermostat elbow.
Hi Marcel,
I missed this post when you created it.
I believe the DJ252 uses the standard Conquest saloon elbow. it certainly fits on my DJ252.
I missed this post when you created it.
I believe the DJ252 uses the standard Conquest saloon elbow. it certainly fits on my DJ252.
Cheers, Henry Curwen
Registrar for Conquest & Century Saloons (DJ250/1, DJ256/7, DJ260/1)
Conquest (Drop Head) Coupe DJ252
Registrar for Conquest & Century Saloons (DJ250/1, DJ256/7, DJ260/1)
Conquest (Drop Head) Coupe DJ252