Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Olive conquest
- andywen8156
- Posts: 34
- Joined: Fri May 05, 2017 8:21 pm
- Location: Tiverton England
Olive conquest
Hi I am not having any luck getting the olive that's at the end of the steering box around the tube. It seems to be 7/16th any ideas where I could
Re: Olive conquest
Would this be any good https://www.ebay.co.uk/itm/302867013608
Re: Olive conquest
TR Revington do a new olive for the TR3 which I think will do the job. https://www.revingtontr.com/product/300 ... e-tr2-3-3a
I used this on my SP250 but it looks just like the Conquest one. I have just measured the SP250 stator tube and it seems to be 3/8" Outside diameter.
I used this on my SP250 but it looks just like the Conquest one. I have just measured the SP250 stator tube and it seems to be 3/8" Outside diameter.
- andywen8156
- Posts: 34
- Joined: Fri May 05, 2017 8:21 pm
- Location: Tiverton England
Re: Olive conquest
Thanks Brian I did order the 7/16 from them but had to send it back as seems measured from the outside of the olive not inside.
- andywen8156
- Posts: 34
- Joined: Fri May 05, 2017 8:21 pm
- Location: Tiverton England
Re: Olive conquest
Thanks Migray will contact them to see what diameter the olive is