The manual for the LD10 specifies "Luvax Piston Type Shock Absorber Oil" for the dampers.
Online searching indicates that this is a "Thin Oil", but I can't find a specific viscosity.
Penrite make a "Shocker Oil No.1" & "Shocker Oil No.2" but are pretty vague as to what they are, and there's no reference to Luvax in either case.
Dynolite, on the other hand, sell a "Shock Oil" which seems to me to be suitable for the Luvax piston units.
https://www.dynolite.com/product/dynoli ... orber-oil/
Does anyone have any experience with this oil, or any other suggestions?
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Damper oil for LD10
-
- Posts: 307
- Joined: Mon May 03, 2021 8:34 am
- Location: Bognor Regis
-
- Posts: 307
- Joined: Mon May 03, 2021 8:34 am
- Location: Bognor Regis
Re: Damper oil for LD10
Thanks for the confirmation, Simon.
I've ordered 2 litres, so I should have plenty to flush and refill all 4 dampers.
I've ordered 2 litres, so I should have plenty to flush and refill all 4 dampers.
Re: Damper oil for LD10
Hi that should be plenty !!!!!!! They probably only take 1/2 pint each !
Cheers Al
Cheers Al