Can someone tell me how the top adjustable arm for the dynamo is fitted, please?
I'd like to know whether the engine end of the arm is bolted in front (nearest the radiator) of the plate attached to the engine or is it behind the plate, i.e. nearest the rear of the car?
Similarly, does the arm sit on the radiator side of the dynamo flange or behind it?
My arm is sitting in front of the dynamo (radiator side), but I suspect that is wrong.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
LD10 Dynamo bracket
-
- Posts: 307
- Joined: Mon May 03, 2021 8:34 am
- Location: Bognor Regis
Re: LD10 Dynamo bracket
Mine is behind on the dynamo, and in front on the block.
Tom
Tom
-
- Posts: 307
- Joined: Mon May 03, 2021 8:34 am
- Location: Bognor Regis
-
- Posts: 307
- Joined: Mon May 03, 2021 8:34 am
- Location: Bognor Regis
Re: LD10 Dynamo bracket
Now that's embarassing!
I've just checked my copy of the manual and, sure enough, there's the same photograph, clearly showing the bracket behind the flange.
I also found another shot from the front in the "Suspension" section that shows the bracket running behind the dynamo.
Mind you, they don't confirm that the arm is bolted in front of the engine front plate, but Tom has done that for me.
I've just checked my copy of the manual and, sure enough, there's the same photograph, clearly showing the bracket behind the flange.
I also found another shot from the front in the "Suspension" section that shows the bracket running behind the dynamo.
Mind you, they don't confirm that the arm is bolted in front of the engine front plate, but Tom has done that for me.