Hello,
Am I right in thinking that the V8-250 saloon takes the standard 82 degree thermostat, as was found in many classics of that era ??
Thank you in advance.
Regards.
Richard.
Please visit the Club's website https://www.dloc.org.uk/ to join. Visit https://www.dloc.org.uk/adhoc to DONATE towards the cost of the forum.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
Please don't post someone's email address to avoid it being harvested by spambots and it's against GDPR regulations.
Always look at "ACTIVE TOPICS" to see all posts in date & time order as they are sometimes moved; or look at "Your Posts".
Please add Reg. nrs. when posting a photo or anything about a car as this will help searches. Don't add punctuation next to nr. as this negates search.
CHANGED YOUR EMAIL ADDRESS since registering?, click your username and check your address in User Control Panel, Profile, Account Settings.
If you want help to register, use "contact us" at page bottom for help.
V8-250 Saloon: Thermostat
-
- Classic Wise Man
- Posts: 1610
- Joined: Wed Sep 05, 2018 9:55 am
- Location: Ridgewood - East Sussex
- Contact:
V8-250 Saloon: Thermostat
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
Re: V8-250 Saloon: Thermostat
Hi, yes there are a few versions of the thermostat, I fitted my with a 70-75c sleeve type as fitted to the xk engines, but the sleeve type are a bit more expensive than the standard type, never had a sleeve type fail on me, well put it this way mine is 17 years old and has never failed to open and close, as long as the coolant is clean and replaced than there should be no issues. these are not specified for the Daimler v8 but mine has been in my v8 for that long so they must be ok. ton. https://www.sngbarratt.com/UK/#!/Englis ... df6f288830
-
- Classic Wise Man
- Posts: 1610
- Joined: Wed Sep 05, 2018 9:55 am
- Location: Ridgewood - East Sussex
- Contact:
Re: V8-250 Saloon: Thermostat
Thanks Tony - much appreciated and thermostat issue now sorted.
Here's another "Starter for Ten" open to all !!
Does anyone know the thread size on the temperature sender unit by the thermostat housing, please ??
Many thanks.
Richard.
Here's another "Starter for Ten" open to all !!
Does anyone know the thread size on the temperature sender unit by the thermostat housing, please ??
Many thanks.
Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
-
- Posts: 86
- Joined: Wed Jan 11, 2017 7:21 pm
- Location: Eindhoven
Re: V8-250 Saloon: Thermostat
IF (a big if) it is the same as the SP250, it is 5/16 UNF.
-
- Classic Wise Man
- Posts: 1610
- Joined: Wed Sep 05, 2018 9:55 am
- Location: Ridgewood - East Sussex
- Contact:
Re: V8-250 Saloon: Thermostat
Okay, thanks - I thought it may be 5/8UNF.
Best wishes.
Richard.
Best wishes.
Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
-
- Posts: 86
- Joined: Wed Jan 11, 2017 7:21 pm
- Location: Eindhoven
Re: V8-250 Saloon: Thermostat
AND YOU ARE RIGHT!!!!
My wife is always telling me that my memory has gone; 5/8 UNF it is!
I know it is right this time because I have just checked the adapter I ordered and fitted last week.
Apologies for any confusion!
Simon
My wife is always telling me that my memory has gone; 5/8 UNF it is!
I know it is right this time because I have just checked the adapter I ordered and fitted last week.
Apologies for any confusion!
Simon
-
- Classic Wise Man
- Posts: 1610
- Joined: Wed Sep 05, 2018 9:55 am
- Location: Ridgewood - East Sussex
- Contact:
Re: V8-250 Saloon: Thermostat
Hello Simon,
Many thanks and no apology required, always useful to get every possibility to a question.
Is your adaptor for a Daimler requirement ??
Best wishes.
Richard.
Many thanks and no apology required, always useful to get every possibility to a question.
Is your adaptor for a Daimler requirement ??
Best wishes.
Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
-
- Posts: 86
- Joined: Wed Jan 11, 2017 7:21 pm
- Location: Eindhoven
Re: V8-250 Saloon: Thermostat
Hi, Richard.
No, not a Daimler requirement per se. I have changed the water temp gauge (purists look away now) to a Smiths Cobra type, since that matches the oil temp gauge I have fitted instead of the ammeter. The gauge I had was an unbranded one that didn't work with the sensor fitted and I did not want to spend the time trying to find original parts. However, the new gauge came with a sensor that has a 1/8" NPT thread so I needed an adapter to fit it into the Dart "hole".
With best wishes,
Simon
No, not a Daimler requirement per se. I have changed the water temp gauge (purists look away now) to a Smiths Cobra type, since that matches the oil temp gauge I have fitted instead of the ammeter. The gauge I had was an unbranded one that didn't work with the sensor fitted and I did not want to spend the time trying to find original parts. However, the new gauge came with a sensor that has a 1/8" NPT thread so I needed an adapter to fit it into the Dart "hole".
With best wishes,
Simon
-
- Classic Wise Man
- Posts: 1610
- Joined: Wed Sep 05, 2018 9:55 am
- Location: Ridgewood - East Sussex
- Contact:
Re: V8-250 Saloon: Thermostat
Thanks Simon, interesting to know.
Good luck.
Richard.
Good luck.
Richard.
1968 Daimler V8-250 Saloon
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024
DLOC East Sussex Branch Secretary
DLOC 2.5L V8 & V8-250 Registrar - https://www.dloc.org.uk/v8-250
DLOC 2024 International Rally - https://www.dloc.org.uk/rally-2024